Doug
Lloyd

Educator and Technologist

Empennage

Kit delivery and inventory

  1. 2020-10-05 A: Delivery of empennage kit
  2. 2020-10-05 B: Unboxing of empennage kit
  3. 2020-10-05 C: Inventorying empennage kit, part one
  4. 2020-10-06: Inventorying empennage kit, part two

Vertical stabilizer

  1. 2020-10-08: Rear spar assembly
  2. 2020-10-09 A: Rear spar and skeleton assembly
  3. 2020-10-09 B: Skeleton assembly and skin
  4. 2020-10-10 A: Skin match drilling and deburring
  5. 2020-10-10 B: Skin and spar ribs dimpling
  6. 2020-10-11: Front spar and skeleton dimpling
  7. 2020-10-22 A: Attaching and drilling brackets
  8. 2020-10-22 B: Attaching and drilling brackets
  9. 2020-10-23: Sanding and washing parts to prep for priming
  10. 2020-10-24 A: Priming parts
  11. 2020-10-24 B: Riveting parts

Rudder

  1. 2020-10-12: Separating ribs, shear clips, stiffeners, rudder horn work
  2. 2020-10-13: Attaching stiffeners, counterbalancer ribs, horn, and dry-fitting skins
  3. 2020-10-14: Skins match drilling
  4. 2020-10-15 A: Prepping trailing edge and deburring
  5. 2020-10-15 B: Deburring and dimpling skin and spars
  6. 2020-10-16: Countersinking trailing edge holes
  7. 2020-10-22: Attaching and drilling brackets
  8. 2020-10-22 B: Attaching and drilling brackets
  9. 2020-10-23: Sanding and washing parts to prep for priming
  10. 2020-10-24 A: Priming parts
  11. 2020-10-25: Riveting parts

Tailcone

  1. 2020-10-17 A: Manufacture tie-down, bulkhead elements, stiffeners
  2. 2020-10-17 B: Attach rudder cable angle to bulkhead
  3. 2020-10-19 A: Bulkhead and horizontal stabilizer attachment angle; aft-most cone frame
  4. 2020-10-19 B: Forward cone frames
  5. 2020-10-20: Trim J-channel for tailcone stiffeners

Horizontal stabilizer

  1. 2020-10-26: Match drill spar and doubler, manufacture attach brackets

Elevators

Top